IJ Marine

Marine Surveys & Boat Safety Examinations

100_5503 DSC00268 shed1

Seamaster 30

1b_325884_t26

TERMS & CONDITIONS

Survey Terms Scope Of Survey Survey Contract

The following documents are available for download and should be read prior to engaging the services of IJ Marine.

A condition survey provides an opinion on the structural condition of all visible and significant aspects of the structure of the vessel as presented for survey, with particular reference to hull condition.

 

Machinery, masts, spars, rig and sails, ancillary equipment, gas, electrical, electronic, pumping and plumbing equipment, sewage treatment plant, refrigeration equipment, air conditioning, navigational aids, other sundry services and tankage are inspected only for visual appearance and installation standards, without dismantling or specific test. Where a mast is stepped only those parts of the mast and rig up to head height are inspected in detail.

 

Hull condition is assessed by general non-destructive examination and by assessment of the condition of sample areas where coatings are removed. Where hulls carry heavy layers of paint, pitch or epoxy finishes the condition of all areas of the substrate cannot be guaranteed and condition can only be estimated on the basis of the evidence gleaned from sample areas scraped clean. The survey does not provide an opinion on the condition of areas not presented visible. For example:- behind linings, beneath fixed floors etc. unless these are accessible through visible portable traps, and should not be taken to preclude completely the existence of isolated damage or deterioration concealed by paints, fillers or other means.

 

No liability whatsoever is accepted for any injury, death or damages arising from those parts of the vessel to which access could not be gained at the time of survey and on the strength of which I am unable to comment.

 

The engine and generator installations are inspected visually, and (where possible if presented in commission) the engine is run up to assess its general running characteristics, vibration levels etc.. No dismantling of the engine or associated equipment is carried out within the scope of a condition survey so no detailed comment upon the condition of internal parts is possible without separate full strip down and mechanical survey.

 

Electrical, plumbing, heating and other services are inspected where visible but not operated unless presented in commission. Electrical wiring is inspected visually only in all cases.

 

The bottled gas installation is inspected visually only and pressure tests are not undertaken within the scope of this survey. All gas systems should be regularly tested as part of a normal preventative maintenance routine, and the installation of a bubble test leakage tester which permits simple non-invasive regular checks on the integrity of the system is strongly recommended.

 

Tanks are inspected where visible but not internally, and are not pressure tested. Windows, hatches and external doors are not tested for water tightness. Hull fastenings and skin fittings are not withdrawn for inspection. Any evidence of leakage will be noted in the report.

 

Any estimate of valuation provided is based on average retail values achieved by craft of similar types and condition in the same location and should not be confused with the replacement value, which may be substantially higher, particularly in the case of rare or unusual boats.

 

Particulars such as registration numbers, tonnage, build year and dimensions are normally stated as advised or as exhibited aboard the ship, and are not authenticated. Dimensions, if checked, are measured by means of steel tape measures and should not be relied upon as to total accuracy. This survey does not seek to establish that clear title to the vessel exists or that it is being offered for sale free from all debts or encumbrances.

 

Unless specifically instructed to the contrary the inspection, and any comments made relative to design, performance or suitability of the vessel, are based on the assumption that the vessel will be used as a private pleasure boat in the waters for which it was designed. Unless specifically stated to the contrary this inspection and report does not seek to address compliance with any national or international codes, standards or regulations.

 

This report is prepared solely for the benefit of the client to whom it is addressed and by whom it was commissioned and no responsibility is accepted to any third party to whom the report may be passed or sold.

 

This survey contract shall be governed by and construed in accordance with English law. Any dispute arising hereunder shall be submitted to the exclusive jurisdiction of the courts of England and Wales. No responsibility is accepted for any consequential losses arising, including but not limited to loss of profits, loss of use or business interruption.

Scope of Marine Survey

 

IJ MARINE

 

Marine Surveys

Pre-Purchase

Insurance

Valuation

Boat Safety

 

NORTHANTS

CAMBS

 

EAST MIDLANDS

 

Supplier of best priced Tercoo

Rotating Blasters

in the UK

triple ON-LINE SHOP BannerWide

Click the Button below to access the region's No.1 Chandlery

CHANDLERY